Deburring Machine

Product Details:

Valgro has released the WBS24-1, an entry-level deburring and finishing equipment, in response to strong demand from the small industrial sector. Power savings and a strong build guarantee that the machine runs properly. This demand came in response to Valgro's earlier model, the WBS62. The machine's efficacy is assured by its efficient use of electricity as well as its strong structure. Currently, over 1,000 clients benefit from Valgro's strong and efficient machine performance. It can do general surface sanding, such as eliminating deep scratches, surface finishing, oxide layer removal and other tasks. 
Overview Of Machine Features

• Dry operation reduces production and maintenance expenses. 
• Long machine life equals great ROI. 
• Robust design with Silent working system 
• High-efficiency feed-through conveyor Automatic belt tracking system. 
• Quick-change abrasive belt design. 
• Four pillar conveyor bed lift for faster, more consistent surface finishing. 
• Low-maintenance, user-friendly. 
• No skilled labor is needed. 
• Machine has dust collecting hood.

Suitable Material:

• Mild steel 
• Stainless steel 
• Aluminum
• Non ferrous metals. 

Achieve Finish

• Matt 
• Hairline

Additional Information:

• Delivery Time: 2 3 months

Product Details:

Deburing + Edge Rounding 

VALGRO-SAMARTH – Edge Breaker Series END EDGE Deburring Machine is designed to remove metal burrs and shear cut edge from ends of pipes, tubes, and profiles. Its single head semi-automatic end edge deburring system helps you to easily activate clamping mechanism. Its automatic clamp shell hood provides additional safety from dust. It drives variable speed with a 2 HP motor attached to 12inches or 14inches Valgro disc deburring brush.

Application:

It is also compatible with many different cut tubes and profile shapes and delivers results in a few seconds and a single operation.
The deburring operation can be done simultaneously inside and outside the tube in a single operation without rotating the pipe.
The process result is the elimination of burrs getting slightly rounded edges.
It can be integrated with a single Head Semi-Automatic End Edge Deburring System.
Its automatic clamp shell hood provides added safety and additional dust control.

Features

• Pneumatic brush head movement. Multiple disc brushes with 12 and 14 inches. 
• 2HP motor and variable speed drive. Custom clamping for adjusting lengths. Three to four cycles per minute. Compatible with table extension. 
• Brush diameter can range up to 400mm. 
• Full cover boy for dust protection. 
• Dust collection unit: DS3. Table movement length can range up to 600mm.

Technical Advantage

• Aluminum extrusions saw cut profile for automotive, aerospace, building Cut Tube, Pipe deburring.
•  Valgro Abrasive nylon brushes are an excellent tool for deburring and Edge Radiusing. 

Additional Information:

• Delivery Time: 2 to 3 Month

Product Details:

Valgro sheet metal and edge deburring machines are designed to remove metal burrs from the sheet external peimeter. Burr formation happens after cutting process such as shearing, punching, etc. Deburring is required in some cases for aesthetic reason and in others for removing sharp edges for safty reasons.

These machines are suitable for deburring metal outer perimeters straights of the sheet. The deburring operation is carried out for both sides of the sheet in a single operation. The process result is the elimination of burrs getting slightly rounded edges.

Additional Information:

• Delivery Time: 1 2 Month

Product Details:

The Valgro Samarth Disc Expert Series Precision Deburring Machine is suitable for surfacing of nonferrous and ferrous sheet metals parts. Valgro brings to you the expertise in dealing with every surface , and offering cutting edge deburring technology with in-depth process knowledge. The range of Valgro Deburring Machines and Deburring Solutions extends from Machined Automotive Components to Punched and Fine Blanked Parts.Our Samarth Edge breaker Series Deburring & Finishing machine is the ultimate solution for achieving a uniform roughening brush effect that enhances the powder coating of your materials.Our machine is designed to provide higher productivity than conventional deburring systems and eliminates the need for manual deburring work. With Valgro’s Samarth Series, you can expect a cost-effective and flexible configuration for sheet Deburring that suits your needs.We understand that burrs can vary in strength and adhesion when punching or laser cutting your materials. Therefore, finding a comprehensive deburring solution is crucial. Valgro has developed various models of our Samarth Series Deburring & Finishing machine to meet your needs and provide a uniform finish for your products.Our team of experts has years of experience in the deburring industry and is dedicated to providing you with the best-in-class Deburring & Finishing machines. Contact us today to learn more about how Valgro can help you achieve a smooth and uniform surface finish for your products.

Additional Information:

• Delivery Time: 2 3 month

Product Details:

SAMARTH Classic Series Deburring & Finishing Machine is suitable for metal finishing and deburring at an affordable price with many standard features.

Product Details:

Your perfect solution for Plasma/Laser Cut component! The machine efficiently handles sanding, deburring, edge rounding, and grinding. Equipped with a multi-head system and wet dust extraction, it guarantees both high performance and safety in every operation.

Product Details:

A sheet metal edge rounding machine smooths and rounds sharp edges of metal sheets, enhancing safety and aesthetics. Featuring adjustable radii and high-speed operation, it efficiently processes various metal types. Ideal for manufacturing and metalworking, it improves product quality while ensuring compliance with safety standards.

Product Details:

This sheet metal end-edge deburring machines efficiently remove metal burrs from the external perimeter of sheets. Burrs often form during cutting processes like shearing and punching. Deburring is essential not only for achieving a polished aesthetic but also for eliminating sharp edges, and enhancing safety in handling.

 

Product Details:

The SLR Series combines deburring and edge rounding functionalities, offering a comprehensive solution for industries looking to streamline their processes. With this series, businesses can achieve efficient deburring and precise edge rounding in a single machine. The SLR Series features four models, each tailored to different operational needs. From a 600mm working width to a 1550mm working width, these machines cater to a range of production scales. Furthermore, the SLR Series boasts a remarkable thickness capacity, handling materials from 1mm minimum to 75mm maximum, ensuring versatility and effectiveness in finishing various workpieces.

Product Details:

A sheet metal deburring machine is designed to remove sharp edges, burrs, and imperfections from metal sheets, ensuring a smooth and safe finish. By employing abrasive belts, brushes, or discs, these machines efficiently deburr metal parts after cutting, punching, or stamping processes. They enhance the quality of the final product while improving worker safety by eliminating hazardous edges. Sheet metal deburring machines are essential in industries like automotive, aerospace, and manufacturing, where precision and surface quality are critical. Additionally, they contribute to extending the lifespan of components by reducing wear caused by rough edges. Valgro is the one of the Leading manufacturing for deburring & Finishing Machine.

Product Details:

Description:
FRP Edge Deburring Cleaning Machine

IN FRP Grating Deburring is an important operation. it should be given attention because removal of burrs is critical to safety and quality.

The deburring process is meant to remove a build-up of burrs and other imperfections from a finished surface. It is also a prerequisite to other processes, including powder coating and electroplating. Deburring is a truly valuable step in the manufacturing process.

• Expert in metal preparation

 

 

Product Details:

Description:
Flat metal sheet component deburring is a versatile operation that enables your manufacturing unit to operate at a cheaper cost.

It removes microscopic scratches, acid coatings, and oxide from the metal sheets’ surface. The Valgro brushing and deburring machine is safer and more efficient than a traditional deburring system, a indt may eliminate human deburring work. Valgro has developed many sheet deburring models to increase flexibility and save costs.

• Expert in metal preparation
• Valgro India Limited
• Explore Opportunity

Accomplishment
Flat metal sheet component deburring is a versatile operation that enables your manufacturing unit to operate at a cheaper cost. It removes microscopic scratches, acid coatings, and oxide from the metal sheets’ surface. The Valgro brushing and deburring machine is safer and more efficient than a traditional deburring system, and it may eliminate human deburring work. Valgro has developed many sheet deburring models to increase flexibility and save costs.

Overview Of Machine Features

• Multiple thicknesses from 0.8mm to 3mm Suitable for different metals including stainless steel, zinc, aluminum and others 
• Eco-friendly process 
• Reduce labor and operational costs 
• Contactless handling for avoiding scratches Can be integrated into the current production process Deburr of small and large parts together 
• Compact design for small space units The thin part can be deburring No heat generation – No deformation Faster production – saving time Clean and Green environment 
• Low Space requirement Save money Reduce labor and workforce cost

Suitable Material

• Stainless steel 
• Aluminum
•  Non ferrous metals. 

Achieve Finish

• Matt Hairline 
• Satin finish

Text on Image : Valgro

Product Details:

A sheet metal edge rounding machine smooths and rounds sharp edges of metal sheets, enhancing safety and aesthetics. Featuring adjustable radii and high-speed operation, it efficiently processes various metal types. Ideal for manufacturing and metalworking, it improves product quality while ensuring compliance with safety standards.

Product Details:

The EZ Series Deburring & Finishing Machine offers an accessible solution for industries seeking to enhance productivity and transition from manual operations. This series comprises three distinct models, providing working widths ranging from 150mm to 600mm. Additionally, the machine accommodates material thicknesses from 1mm minimum to 75mm maximum, ensuring versatility in processing various workpieces.

The Valgro Table Top Deburring Machine is a compact and efficient solution designed for precise deburring and edge-breaking operations, particularly suited for small workshops or businesses with moderate production needs. 

Product Details:

The SAMARTH DB Series deburring & Finishing machine is intended to clean, deburr, and polish sharp corners, holes, edges, and variable parameters on metal sheet components without causing harm to the surface. Flat metal sheet component deburring is a versatile operation that enables your manufacturing unit to operate at a cheaper cost.
Features:

• Multiple thicknesses from 0.8mm to 3mm.
• Suitable for different metals including stainless steel, zinc, aluminum and others.
• Eco-friendly process.
• Reduce labor and operational costs.
• Contactless handling for avoiding scratches.
• Can be integrated into the current production process.
• Deburr of small and large parts together.

Additional Information:

• Delivery Time: 2-3 months

Product Details:

Samarth Series: Brushing Machine
Deburring, Finishing, Cleaning Brushing flat sheet metal parts

The SAMARTH DB Series deburring & Finishing machine is intended to clean, deburr, and polish sharp corners, holes, edges, and variable parameters on metal sheet components without causing harm to the surface. Flat metal sheet component deburring is a versatile operation that enables your manufacturing unit to operate at a cheaper cost.

It removes microscopic scratches, acid coatings, and oxide from the metal sheets’ surface. The Valgro brushing and deburring machine is safer and more efficient than a traditional deburring system, and it may eliminate human deburring work. Valgro has developed many sheet deburring models to increase flexibility and save costs.

Additional Information:

• Delivery Time: 2 to 3 months

Product Details:

Description:
The Valgro LBF Karma can be used for plasma and laser cut flat parts for various applications such as deburring, and edge rounding. Valgro Karam series is available in various configurations including Belt + Brush, .

VALGRO long belt finishing machines have a flexible abrasive belt that enables finishing on flat surfaces of big dimensions.  VALGRO-LBF KARAM machine is ideal for Hot and Cold rolled laser cut parts deburring and edge rounding.

• Expert in metal preparation
• Valgro India Limited
• Explore Opportunity

 

Vag =

Product Details:

A plasma gas cut components deburring machine is designed to sand all edges uniformly, leaving a thin scratch pattern on the surface. The Valgro De-Slagger Series is designed to handle class 4 and 5 burrs, including dross and slag. It is completely automatic and will deburr all edges without any difficulty. It is made up of a multi-head deburring and sanding station, with the heads spinning around to form the edge radius on metal objects. It is also possible to operate different surfaces of the components with different brush grit combinations. Valgro-De-Slagger Series Machines are perfect for removing slag and dross from plasma and gas cut components, as well as replacing chipping and manual grinding operations. Valgro India sets standards in revolutionary sheet metal processing with highly effective methods. It is perfect for two-sided deburring and edge rounding of punched, laser, and high-definition plasma cut workpieces since it requires just one work procedure. It efficiently eliminates plasma arc, saving up to 60% of operational expenses.

Additional Information:

• Delivery Time: 2 - 3 Month